LineLazer Spray Tip Size Guide

Genuine Graco spray tips for LineLazer airless line striping machines. Use this guide to help you choose the right RAC 5 SwitchTip for the job.

LineLazer Tip Selection Guide. Most LineLazers are supplied with tip LL5319. For additional applications, use the tip selection table as follows:

Note: the last three digits (LL5319) of the tip part number identifies the line width and tip orifice (opening).

For example: the line width for tip LL5319 is 4 in. as shown in the table below. The tip orifice for tip LL5319 is .019 in.

Tip SizeLine WidthUsed For
286113*2 inchesSport court - light film build
LL5213*2 inchesSport court - heavy film build
LL5215*2 inchesAlkyd paints only - light film build
LL52172 inchesAlkyd paints only - medium film build
LL52192 inchesAlkyd paints only - heavy film build
LL53154 inchesMost traffic paints - light film build
LL53174 inchesMost traffic paints - medium film build
LL53194 inchesMost traffic paints - medium film build
LL53214 inchesMost traffic paints - heavy film build
LL53234 inchesMost traffic paints - heavy film build
LL53254 inchesMost traffic paints - heavy film build
LL5327†4 inchesMost traffic paints - heavy film build
LL5329†4 inchesMost traffic paints - heavy film build
LL5331†4 inchesMost traffic paints - heavy film build
LL5333†4 inchesMost traffic paints - heavy film build
LL5335†4 inchesMost traffic paints - heavy film build
LL5339†4 inchesMost traffic paints - heavy film build
LL5343†4 inchesMost traffic paints - heavy film build
LL5417#4 - 8 inchesAll paints and high solids traffic paints - light film build
LL5419#4 - 8 inchesAll paints and high solids traffic paints - medium film build
LL5421#4 - 8 inchesAll paints and high solids traffic paints - heavy film build
LL54234 - 8 inchesAll paints and high solids traffic paints - heavy film build
LL54254 - 8 inchesAll paints and high solids traffic paints - heavy film build
LL54274 - 8 inchesAll paints and high solids traffic paints - heavy film build
LL54294 - 8 inchesAll paints and high solids traffic paints - heavy film build
LL54314 - 8 inchesAll paints and high solids traffic paints - heavy film build
LL54354 - 8 inchesAll paints and high solids traffic paints - heavy film build
LL54394 - 8 inchesAll paints and high solids traffic paints - heavy film build
LL54434 - 8 inchesAll paints and high solids traffic paints - heavy film build
LL56218 - 12 inchesAll traffic paints - light film build
LL56238 - 12 inchesAll traffic paints - medium film build
LL56258 - 12 inchesAll traffic paints - medium film build
LL56278 - 12 inchesAll traffic paints - heavy film build
LL56298 - 12 inchesAll traffic paints - heavy film build
LL56318 - 12 inchesAll traffic paints - heavy film build
LL56358 - 12 inchesAll traffic paints - heavy film build
LL56398 - 12 inchesAll traffic paints - heavy film build
LL56438 - 12 inchesAll traffic paints - heavy film build

* May require 100 mesh filter to minimize tip plugging.
† Best for use with LineDriver.
# Best for cold weather applications.

How to Maximize Line Quality and Reduce Tip Wear.
Observe the following suggestions to increase line quality and minimize sprayer tip wear.

  • Select a larger tip orifice and run the sprayer at a reduced operating pressure.
  • Running larger tip sizes (example: use tip LL5321 @ 2000 psi instead of LL5317 @ 3300 psi) will significantly increase tip life and reduce tip plugging. It will also produce a more uniform film build across the line.

Graco LineLazer RAC 5 SwitchTips

Graco LineLazer spray tips

Order Graco LineLazer tips

These yellow tips are specifically designed for line stripping machines. Creates clean, laser-sharp lines with no fuzzy edges. Sprays heavy water-based to thin alkyd traffic paints. Fits the orange RAC5 tip guard.
LL5 and tip size - LL5xxx such as LL5319. Fits RAC 5 Guard (aka RAC V) and RAC IV too.

Orifice size - inches (thousandths)
Fan Size.013.015.017.019.021.023.025.027.029.031.033.035.039.055
2213215217219          
4 315317319321323325327329331333335 355
4-8  417419421423425427429431 435  
8-12    621623625627629631 635639 
Flow Rate (gpm).18.24.31.38.47.57.67.77.901.031.171.311.633.25
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate
Example: for a tip with a .015 orifice and a 6 in (152 mm) pattern, order LTX315