Jenny 2(K1C)-60C 2HP Duplex Climate Control HVAC Air Compressor, 60 Gallon Tank, 7.4cfm @ 100psi

Jenny 2(K1C)-60C 2HP Duplex Climate Control HVAC Air Compressor, 60 Gallon Tank, 7.4cfm @ 100psi

The Jenny 2(K1C)-60C is a 2hp duplex single stage reciprocating air compressor specifically designed for climate control compressed air applications. The 2(K1C)-60C is mounted on a 60gallon tank which utilizes two 1hp pumps and motors and will deliver a combined 7.4cfm @ 100psi.

Since this compressor is a duplex climate control air compressor, it will utilize two pumps and two 1hp motors mounted on a common tank. Each pump displaces 3.7cfm for a combined capacity of 7.4cfm when both pumps are running. A pre-installed alternator is included which will alternate which compressor pumps turn on to equalize run hours.

The 2(K1C)-60C includes the Jenny K series compressor pump. This is a fully cast iron pump that turns at a slower RPM compared to most industrial air compressors. The slow turning pump results in less heat for increased longevity and less oil contamination downstream into the system. This pump is manufactured in Somerset Pennsylvania.

2(K1C)-60C is mounted on a 60 gallon air receiver. This climate control piston air compressor will have a pressure switch pre-set to turn on the compressor at 75psi and turn off at 100psi.

This compressor is available in 115v single phase power, 230v single phase or 208/230/460v three phase power and will be pre-wired to your building power before shipping.

Standard Features - Jenny 2(K1C)-60C

•     Heavy-duty cast iron compressor pump Made in Somerset, PA USA
•     Splash lubricated low RPM compressor pump
•     Belt driven with a large flywheel for extra cooling and easier start-up
•     Each unit is filled with Jenny Synthetic Blue Compressor Pump Oil
•     Directional air shroud for reduced pump temperatures
•     Totally enclosed heavy-duty beltguard
•     Protectively mounted fittings
•     Manual tank drain(s)
•     Large canister intake filter with replaceable filter elements
•     Tank gauge
•     Pressure relief safety valve
•     Auto Start/Stop control with pressure unloader set at 75-100 PSI
•     Industrial/Commercial grade UL Listed electric motor
•     Thermal overload motor protection