Jenny 2(T20C)-240C 40HP Duplex Climate Control HVAC Air Compressor, 240 Gallon Tank, 147cfm @ 100psi

Jenny 2(T20C)-240C 40HP Duplex Climate Control HVAC Air Compressor, 240 Gallon Tank, 147cfm @ 100psi

The Jenny 2(T20C)-240C is a 40hp duplex two stage reciprocating air compressor specifically designed for climate control compressed air applications. The 2(T20C)-240C is mounted on a 240 gallon tank which utilizes two 20hp pumps and motors and will deliver a combined 147cfm @ 100psi.

Since this compressor is a duplex climate control air compressor, it will utilize two pumps and two 20hp motors mounted on a common tank. Each pump displaces 73.5cfm for a combined capacity of 147 cfm when both pumps are running. A pre-installed alternator is included which will alternate which compressor pumps turn on to equalize run hours.

The 2(T20C)-240C includes the Jenny T series compressor pump. This is a fully cast iron pump that turns at a slower RPM compared to most industrial air compressors. The slow turning pump results in less heat for increased longevity and less oil contamination downstream into the system. This pump is manufactured in Somerset Pennsylvania.

2(T20C)-240C is mounted on a 240 gallon air receiver. This climate control piston air compressor will have a pressure switch pre-set to turn on the compressor at 75psi and turn off at 100psi.

This compressor is available in 208/230/460v three phase power and will be pre-wired to your building power before shipping.

Standard Features - Jenny 2(T20C)-240C

•     Heavy-duty cast iron compressor pump Made in Somerset, PA USA
•     Splash lubricated low RPM compressor pump
•     Belt driven with a large flywheel for extra cooling and easier start-up
•     Each unit is filled with Jenny Synthetic Blue Compressor Pump Oil
•     Directional air shroud for reduced pump temperatures
•     Totally enclosed heavy-duty beltguard
•     Protectively mounted fittings
•     Manual tank drain(s)
•     Large canister intake filter with replaceable filter elements
•     Tank gauge
•     Pressure relief safety valve
•     Auto Start/Stop control with pressure unloader set at 75-100 PSI
•     Industrial/Commercial grade UL Listed electric motor
•     Thermal overload motor protection