Jenny 2(W5C)-80C 10HP Duplex Climate Control HVAC Air Compressor, 80 Gallon Tank, 35.4cfm @ 100psi

Jenny 2(W5C)-80C 10HP Duplex Climate Control HVAC Air Compressor, 80 Gallon Tank, 35.4cfm @ 100psi

The Jenny 2(W5C)-80C is a 10hp duplex two stage reciprocating air compressor specifically designed for climate control compressed air applications. The 2(W5C)-80C is mounted on an 80 gallon tank which utilizes two 5hp pumps and motors and will deliver a combined 35.4cfm @ 100psi.

Since this compressor is a duplex climate control air compressor, it will utilize two pumps and two 5hp motors mounted on a common tank. Each pump displaces 17.7cfm for a combined capacity of 35.4cfm when both pumps are running. A pre-installed alternator is included which will alternate which compressor pumps turn on to equalize run hours.

The 2(W5C)-80C includes the Jenny W series compressor pump. This is a fully cast iron pump that turns at a slower RPM compared to most industrial air compressors. The slow turning pump results in less heat for increased longevity and less oil contamination downstream into the system. This pump is manufactured in Somerset Pennsylvania.

2(W5C)-80C is mounted on an 80 gallon air receiver. This climate control piston air compressor will have a pressure switch pre-set to turn on the compressor at 75psi and turn off at 100psi.

This compressor is available in 208/230/460v three phase power and will be pre-wired to your building power before shipping.

Standard Features - Jenny 2(W5C)-80C

•     Heavy-duty cast iron compressor pump Made in Somerset, PA USA
•     Splash lubricated low RPM compressor pump
•     Belt driven with a large flywheel for extra cooling and easier start-up
•     Each unit is filled with Jenny Synthetic Blue Compressor Pump Oil
•     Directional air shroud for reduced pump temperatures
•     Totally enclosed heavy-duty beltguard
•     Protectively mounted fittings
•     Manual tank drain(s)
•     Large canister intake filter with replaceable filter elements
•     Tank gauge
•     Pressure relief safety valve
•     Auto Start/Stop control with pressure unloader set at 75-100 PSI
•     Industrial/Commercial grade UL Listed electric motor
•     Thermal overload motor protection